The quantities can be represented as primary or secondary values in different views:
Analog and binary signals are represented as a function over time. Analog quantities can be displayed as instantaneous or RMS values.
This view visualizes measured and calculated quantities (e.g. symmetrical components) as complex vectors at defined points in time.
This view visualizes complex quantities as locus diagrams. Impedance locus diagrams can be represented together with tripping zones of distance relays. Zone settings can be imported using the XRIO format.
The Harmonics view shows the RMS values of harmonics of selected measured quantities as bar graphs. The amplitude values are given in absolute values and as a percentage of the fundamental. The harmonics are determined using a full-cycle DFT (Discrete Fourier Transformation).
The Table view shows the values of several signals at the cursor positions. The signals are arranged in rows, where the individual columns contain the respective values.
TransView supports data in COMTRADE format (C37.111-1991 and P37.111/D11-1999).
Note: TransView can be used
TransView is a software for visualization and analysis of recorded analog and binary signals, or transients in the network, which were recorded with transient recorders (relay-internal recording, CMC 356 or CMC 256plus with EnerLyzer, disturbance recorder). It processes the recorded data graphically and calculates further quantities of the energy system out of the measurement data, like impedances, power vectors, RMS values, etc.